Matek PDB-XT60 with BEC 5V & 12V
Product description
-Input voltage range (3S-4S LiPo operation): 9 - 18V DC
-Regulated 5V and 12V outputs
-LED power indicators (5V & 12V outputs)
-6 ESC outputs & 1 pair VCC / GND pads
ESC outputs:
-Continuous current: 25A * 4 or 15A * 6
Peak current (10 seconds / minute): 30A * 4 or 20A * 6
BEC 5V output:
-Designed for RC receivers, flight controllers, OSD, and servos.
-DC / DC synchronous buck regulator.
-Voltage: 5.0 +/- 0.1VDC
-Continuous current: 2 amps (max.2.5A 10s / minute)
Output Ripple: 40mV (VIn = 16V, VOut = 5V @ 2A load)
-Short-circuit tolerant (5 seconds / minute)
BEC 12V output:
-Designed for Video TX or FPV camera with linear regulator.
-The battery should be 4S LiPo (13 ~ 18V DC)
- Voltage: 12.0 +/- 0.3VDC
-Continuous current: 500mA (Max.0.8A 5s / minute)
-Short-circuit tolerant (2 seconds / minute)
BEC 12V @ 3S LiPo
-Output voltage = 3S LiPo voltage -1V
Physical:
Dimensions: 36 x 50 x 4 mm (without XT60)
-Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g (w / o XT60), 11g (w / XT60)
Bestellnummer | MAT-PDB-XT60 |
EAN | 4260449971972 |
Hersteller | Matek Systems |