Matek PDB-XT60 with BEC 5V and 12V
Matek PDB-XT60 with BEC 5V and 12V
Designed to provide the highest possible performance and reliability on a 36 x 50mm and 4-layer PCB, the PDB-XT60 distributes power from a LiPo pack to 6 ESCs and provides synchronised and regulated DC 5V outputs and linear regulated outputs. DC 12V for power supply of cameras, servos, RC receivers, flight controls, video transmitters, LEDs etc. It offers an XT60 socket for easy connection of the LiPo pack.
Features
2 ounces of copper, 4 layers & 1.6 mm PCB.
Built-in XT60 socket A
total of 6 pairs of ESC solder tags are suitable for H or X frames 5V and
12V output LED indicators and short circuit tolerant
Technical data
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs -
LED operation indicators (5V and 12V outputs) - 6 ESC
outputs and 1 pair of VCC / GND pads ESC
outputs:
- Continuous current: 25A * 4 or 15A * 6
- Peak current (10 seconds / minute): 30A * 4 or 20A * 6
BEC 5V output:
- Designed for RC receivers, flight controls, OSD and servos
- DC / DC synchronous buck converter.
- Voltage: 5.0 +/- 0.1 VDC
- Continuous current: 2 Amps (max. 2.5 A, 10 s / minute)
- Output ripple: 40 mV (VIn = 16 V, VOut = 5 V at 2 A load)
- Short circuit tolerance (5 seconds / minute)
BEC 12V output:
- Designed for Video-TX or FPV cameras with linear regulator.
- The battery should be 4S LiPo (13 ~ 18V DC)
- Voltage: 12.0 +/- 0.3 VDC
- Continuous current: 500 mA (max. 0.8 A, 5 s / minute)
- short-circuit tolerant (2 seconds / minute)
BEC 12V @ 3S LiPo
- output voltage = 3S LiPo voltage -1V
Physical:
- dimensions: 36 x 50 x 4 mm (without XT60)
- mounting: 30.5 x 30.5 mm, Φ3 mm -
weight: 7.5 g (without XT60), 11 g (with XT60)
Bestellnummer | MAT-PDB-XT60-NEW |
---|---|
EAN | 4260449987133 |
Hersteller | Matek Systems |