FETtec FC G4 KISS Flight Controller
FETtec FC G4 KISS Flight Controller
Latest STM32G4 processor
170Mhz + Math accelerator
MPU6000
Designed for 6-27V supply voltage (2S-6S Lipo)
2x onboard BEC (max. 600mA each)
5V BEC for RX
5V/16V BEC for VTX (configurable and real pit*)
2x 8 pin connectors for solderless ESC connection
Connector 1: ESC signal 1-4, telemetry, VCC, GND
Connector 2: ESC signal 5-8 (depending on selected UAV type 1-4), telemetry, VCC, GND
1x 8 pin connector for solderless connection to VTX, camera and OSD of digital systems
real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
2x 6 pin connector for Serials
RX1, TX1, 3.3V, VCC, 5V, GND
RX3, VCS/TX3, RGB LED, VCC, 5V, GND
1x 4 pin connector for receiver
Signal, TLM, 5V, GND
5 UART serials
4 ESC solder pads (signal/GND) at each corner
Buzzer pads
4 tiny RGB LEDs (color selectable)
Supported ESC Protocols
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
FETtec KISS firmware
Onboard OSD
Connector type: JST-SH-1mm
*real pit mode: supply pad switchable
Maximum external dimension: 37.2 x 37.2mm, without mounting tabs 30 x 30mm
Mounting hole arrangement:
20 x 20mm with M2 mounting holes (can be enlarged to M3)
30 x 30mm with M3 mounting holes
30 x 30mm mounting hole tabs are removable to reduce overall FC size
Height: 7.9mm
Weight: 5.37g
Order number | FTT-FET60 |
---|---|
EAN | 4260740040032 |
Manufacturer | FETtec |