FETtec ESC 4in1 45A

FETtec ESC 4in1 45A

Product description

FETtec ESC 4in1 45A

This ESC is made for top class FPV Racing. With its own closed-source firmware, a limitation to 45A and DSHOT2400 support, this ESC is an absolute must have for racers. Made in Germany.

Attention: When using with 6S batteries you MUST solder on suitable capacitors, otherwise there is a risk that the ESC will burn out.

Technical data

• Active limitation to 45A per motor
• Suitable batteries: 3S-6S
• High quality 40V MOSFETs
• STM32G071 @ 64MHz
• 128 kHz Motor PWM
• Full sine control
• Solder points for up to 5 additional capacitors
• KISS FC Passthrough
• Betaflight Passthrough (available from 4.1)
• Automatic input signal detection
  
  • Dshot 300-2400
  • PWM
  • OneShot42/125
  • OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
  • in development: Crossfire, SBUS
• 38 mm x 38 mm
• Mounting holes: 30.5mm x 30.5mm, M3 breakable for M4

Content

• FETtec ESC 4in1 6S 45A
• Capacitor 50V, ESC < 1ohm (477CKE050M)
• JST-SH 8 pin cable