Mateksys H743 Wing V3 Flight Controller

Mateksys H743 Wing V3 Flight Controller

Product description

Mateksys H743 Wing V3 Flight Controller

Specifications

• MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
• IMU ICM42688-P(V3)+ICM42605
• Baro: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Blackbox: MicroSD card slot (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 13x PWM outputs (including "LED" pad)
• 2x I2C
• 1x CAN
• 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
• 3x LEDs for FC STATUS (blue, red) and 3.3V indicator (red)
• 1x SPI3 breakout
• USB/Beep Extender with Type-C (USB2.0)
• Switch for dual camera inputs
• 5V/9V(12V) for camera/VTX current switch
• High precision current sensor (90A continuous, 220A peak)
• Battery voltage sensor: 1K:10K (scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
• ADC VB2 voltage divider: 1K:20K
• ADC AirSpeed voltage divider: 20K:20K
• Static power 160mA@5V

Features

Firmware

ArduPilot(ChiBiOS): MATEKH743
INAV: MATEKH743
PDB

Input voltage range: 8~36V (3~8S LiPo) with TVS protection
2x ESC power pads
Current sense: 220A, 3.3V ADC (scale 150 in INAV, 66.7 A/V in ArduPilot)
Sense resistance: 90A continuous, 220A peak.
BEC 5V Output

Designed for flight control, receiver, OSD, camera, buzzer, 2812 LED_Strip, buzzer, GPS module, AirSpeed
Output 5.15 +/- 0.1V DC
Continuous current 2 amps, 3A peak
BEC 9V /12V Output

Designed for video transmitter, camera, gimbal, etc.
Continuous current 2 amps, 3A peak
12V option with jumper pad

BEC Vx output

Designed for servos
Voltage adjustable, 5V standard, 6V or 7.2V via jumper
Continuous current 8 amps, 10A peak
BEC 3.3V output

Linear regulator
Continuous current: 200mA