Mateksys F405 WING V2 Flight Controller

Mateksys F405 WING V2 Flight Controller

Product description

The Matek F405 WING V2 flight controller is equipped with a DPS310 barometer, an AT7456E OSD, 6 UARTs and a USB Type-C output. Perfect for your flight control needs!

Specifications

• MCU: STM32F405RGT6, 168MHz, 1MB Flash
• IMU: ICM42688-P
• Barometer: DPS310
• OSD: AT7456E
• Blackbox: MicroSD card slot
• 6x UARTs, 1x Softserial_Tx option (INAV)
• 10x PWM outputs
• 2x I2C
• 3x ADC (VBAT, current, RSSI)
• Built-in inverter for SBUS input
• USB Type-C (USB2.0)
• Supports Ardupilot: MatekF405-Wing and INAV: MATEKF405SE
• Mounting: 30,5x30,5mm
• Dimensions: 54x36x13mm
• Weight: 25g

PDB (Power Distribution Board)

• Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
• Current sensor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V)
• Sense resistor: 100A continuous, 220A peak
• Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)

BEC 5V output

• Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
• Continuous current: 2 Amps

BEC 9V / 12V output

• Designed for Video Transmitter, Camera, Gimbal ect.
• Continuous current: 2 Amps
• 12V option with jumper pad
• for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vx output

• Designed for servos
• Voltage adjustable, 5V default, 6V or 7.2V options
• Continuous current: 5 Amps, 6A Peak
• for stable Vx output, input voltage should > Vx voltage +1V

BEC 3.3V output

• Designed for external 3.3V peripherals
• Linear Regulator
• Continuous current: 200mA