Matek Flight Controller F405 MineTE

Matek Flight Controller F405 MineTE

Product description

Matek Flight Controller F405 MineTE

FC specifications

• MCU: STM32F405RGT6
• IMU: ICM42605
• OSD: AT7456E
• Baro: Goertek SPL06-001 (I2C)
• Blackbox: 16M-Byte Flash memory
• 6x UARTs, 1x Softserial_Tx option
• 12x PWM outputs (8x Dshot)
• 1x I2C
• 4x ADC (VBAT, current, RSSI, airspeed)
• 2x PINIO
• 1x SH1.0_8pin connector (Vbat/G/Curr/R3/S1/S2/S3/S4)
• 1x SH1.0_6pin connector for DJI FPV Air Unit
• 3x LEDs for FC STATUS (blue, green) and 3.3V indicator (red)
• Two BEC, 5V 1.7A & 10V 1.4A
• 10V output ON/OFF switchable
• Convertible 20mm to 30.5mm mount

Power Supply

• Input: 6~30V (2~S LiPo)
• BEC: 5V 1.7A, Max.2A
• BEC: 10V 1.4A for VTX or DJI Air unit
• Battery voltage sensor: 1K:20K (INAV scale 2100, BF scale 210)
• No current sensor built-in, supports external current sensor from PDB/4in1

Firmware

• ArduPilot: MatekF405-TE
• INAV: MATEKF405TE
• BetaFlight: MATEKF405TE

Mounting

• 20 x 20mm/Φ3mm with silicon grommets
• 20 x 20mm/Φ2mm with silicon and brass grommets
• 30,5 x 30,5 mm/Φ3 mm with conversion plate and silicon grommets
• Dimensions: 28 x 28 mm
• Weight: 5g

Content

• 1x FC F405-miniTE
• 1x 20mm to 30.5mm conversion plate (blue PCB)
• 6x silicone grommets M4 to M3
• 6x brass grommets M3 to M2
• 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
• 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit