Matek F765 Wing Flight Controller

Matek F765 Wing Flight Controller

Product description

Matek F765 Wing Flight Controller

FC Specifications

• MCU: STM32F765VIT6, 216MHz, 512KB RAM, 2MB Flash
• IMU: MPU6000 (SPI1) & ICM20602 (SPI3)
• Baro: BMP280 (I2C2)
• OSD: AT7456E (SPI2)
• Black box: MicroSD card slot (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) with integrated inversion.
• 1x Softserial1_Tx (INAV)
• 12x PWM outputs (S1~S10 supports Dshot)
• 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
• 3x LEDs for FC STATUS (blue, red) and 3.3V display (red)
• 2x I2C
• 1x SPI4 Breakout
• Switchable dual camera inputs
• Switchable 5V/9V(12V) for camera/VTX
• High-precision current sensing
• ADC VB2 Voltage divider: 1K:10K
• ADC AirSpeed voltage divider: 10K:10K:10K
• TR/SA VTX control: Yes
• WS2812 Led Strip : Yes
• Beeper: Yes
• RSSI: Yes
• Analogue air speed sensor: Yes
• Digital air speed sensor: Yes
• FC Firmware

INAV target: MATEKF765
ArduPilot(ChiBiOS) target: MATEKF765 WING PDB

Input voltage range: 9~36V (3~6S LiPo) with/TVS protection
2x ESC Power Pads
Battery voltage sensor: 1:10 (scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) Current
sensor: 132A, 3.3V ADC (scale 250 in INAV, 40 A/V in ArduPilot) BEC 5V
output

Designed for air traffic controller, receiver, OSD, camera, buzzer, 2812 LED_Strip, buzzer, GPS module, AirSpeed Continuous
current: 2 amps, max. 3A BEC 9V /12V
output

Designed for video transmitter, camera, gimbal etc.
Continuous current: 2 amps, max. 3A
12V option with jumper pad
BEC Vx output

Designed for servos
Voltage adjustable, 5V standard, 6V or 7.2V via jumper Continuous current:
8 Amps, max. 10A BEC 3.3V
output

Designed for Baro / Compass module and Spektrum RX
linear regulator
Continuous current: 200mA
Physical

Mounting: 30.5 x 30.5 mm, Φ4mm with eyelets Φ3mm
Dimensions: 54 x 36 x 13 x 13 mm Weight:
26g