Lumenier LUX H7 HD Ultimate FC Flight Controller
Lumenier LUX H7 HD Ultimate FC Flight Controller
The Lumenier LUX H7 HD Ultimate Flight Controller is Lumenier's most advanced and powerful flight controller yet! It uses an extremely fast H7 processor along with high quality hardware components. Unleash the capabilities of your Cinema (Cine-Lifter) drone or FPV Racing quadcopter with the Lumenier LUX H7 Ultimate Flight Controller. The LUX H7 is packed with features like dual gyros, dual 4in1 EC connectors, 13 PWM outputs, dual camera support, BEC 9V power for DJI Air devices, black box logging and much more!
The LUX H7 builds on the best features of its predecessor F7 and further improves the hardware components and layout. You get an incredible 7x dedicated UART ports with built-in inversion for peripherals, along with an SD card slot for virtually unlimited data logging. What's more, the LUX H7 can handle up to 13 PWM signals at once! This means it can easily support an Octo-Copter, X8, or something even more creative with up to 13 PWM outputs. Eight of these outputs are plug-and-play with dual 4in1 ESC connectors directly on the flight controller. Dual 4in1 ESC stacks + FC is now super simple and clean with plug-and-play configuration.
The integrated BetaFlight OSD makes it super easy to view important information on your FPV display, such as battery voltage, flight time, alerts, RSSI, smart audio and more. Prefer to fly digitally? No problem, just output the OSD data via an open UART, such as the integrated TX3/RX3 on the plug-and-play harness for the DJI FPV Air Unit.
The features don't stop there! The LUX H7 is capable of handling 2 analog camera signals, with a built-in switching function. This means you can run 2 cameras at the same time and assign a switch via the PINIO function in Betaflight to switch between the 2 feeds by flipping a switch. Installing a front and rear camera has never been easier!
Have you ever been in an FPV race where you need to connect your quad, but you don't want to broadcast an FPV signal to get your friends out of the air? Or how about when you crash and need to save your VTX from burning in the hot sun? With the LUX H7, you can turn your VTX on or off with a switch on your radio! The LUX has an integrated regulated 3A 9V power pad designed to power your video transmitter (like DJI FPV Air Unit). Using the PINIO resource, you can assign this pad to a switch on your radio to remotely control the power source for your video transmitter.
Long range quad and FPV pilots will also love the Lumenier LUX H7. It has all the features you need to take full advantage of long range and autonomous flight technology. The LUX H7 has an integrated barometer, buzzer pad, I2C pad, Ardupilot support, iNAV support (coming soon), GPS/compass pads, and up to 13 S1-S12 +LED PWM inputs for a variety of servo and motor controls.
The Lumenier LUX H7 Ultimate is a very flat board that can be mounted in a variety of ways. Signal cables can be soldered directly to the breakout pads to save size and weight, or use the included plug-and-play cables. The LUX supports PPM or serial RX (including FrSky, S.BUS, DSMX, etc.).
Features
Specifications
Firmware targets
Dimensions
Content
| Order number | GET-15858 |
|---|---|
| EAN | 4260691176439 |
| Manufacturer | Lumenier |
