iFlight Titan XL5 FPV BNF with GPS 4S TBS Crossfire

iFlight Titan XL5 FPV BNF with GPS 4S TBS Crossfire

Product description

iFlight Titan XL5 FPV BNF with GPS 4S TBS Crossfire

The TITAN XL5 has amazing flight characteristics and has been equipped with the latest SucceX-D stack and the popular XING engines. All you have to

do is tie and fly!

After the popular TITAN DC5 (DeadCat style frame) iFlight has decided to develop again an X-frame frame to achieve the best performance on both axes and a better weight distribution for freestyle and race

Special features

• 6mm arms developed for better crash resistance
• XING 2208 Motors for more POWER
• GPS pre-installed
• 360° TPU protector and antenna mount

PRE-TUNED & PRE-SETUP:

• Don't worry about the tuning. IFlight has already done this for you!
• GPS-rescure mode is preconfigured and only needs to be activated in Betaflight
• Angle mode is activated on the first flight.
• Motor Power is pre-configured to 70% throttle limit (scaled) and you need more power? Then set the throttle limit to 100%

FRAME // TITANIUM XL5：

• Gewicht：145g
• Diagonal: 250mm
• Arm thickness: 6mm
• Bottom plate thickness: 2mm
• Top plate thickness: 2mm
• camera plate thickness: 2mm

SucceX-E F4 Stack (45A 4-in-1 ESC)：

SucceX-E F4

• MCU：STM32F405
• IMU：MPU6000
• Betaflight OSD：Ja
• Blackbox：8MB
• 4X Uarts（1 2 3 6 )
• 8 x Dshot/Proshot/Oneshot output
• 8 x individual ESC power/ signal pads
• 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
• VTX protocol：Ja
• WS2812 led Strip：Ja
• Baro：Nein
• Beeper：Ja
• Input：2-6S（Max 8S）
• BEC：5V/2.5A cont
• Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

SucceX-E 45A 4in1

• Size: 40*43mm
• Mounting holes: 30.5*30.5mm/Φ3mm
• Weight:14.4g
• Input voltage 2-6S Lipo input
• STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
• Current sensor: Yes
• BEC: No
• Supported: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target: G-H-30 BLS 16.7

Parts list

• 1x TITAN XL5 4S 6S FPV Drone - BNF
• 2 sets Nazgul 5140 propellers
• 1x GPS module