iFlight SucceX-D F7 Twing FC & 60A 4in1 ESC Stack

iFlight SucceX-D F7 Twing FC & 60A 4in1 ESC Stack

Product description

iFlight SucceX-D F7 Twing FC & 60A 4in1 ESC Stack

SucceX-D F7 V2.1 is designed to work seamlessly with DJI's new HD FPV system. To make things even easier, the DJI Air unit can be easily connected to the FC with the included wiring harness. In addition, we've added the popular and reliable USB Type-C instead of Micro-USB, making it the same standard as your DJI module.

Technical data FC

• MCU: 216MHz STM32F722
• Gyro: 2x ICM20689
• Baro: Yes
• Blackbox: 32MB
• Betaflight OSD: Yes
• BEC: 5V 2.5A / 9V 2.5A
• Current sensor scale: 100
• Inverter for SBUS input (UART2-RX)
• Smartaudio & Tramp VTX protocol supported
• Beeper pad : Yes
• RSSI input pad: No
• UARTs：5
• Motor outputs: 8
• 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
• 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
• BLHeli32 Telemetry: RX5
• Input voltage: 2-6S, MAX 8S
• Firmware Target: IFLIGHT_F722_TWING
• Drill holes: 30.5x30.5mm 4mm diameter / 3mm with rubber dampers
• Size: 36x36mm
• Weight: 7.5g
• USB type-C

Technical data ESC

• MCU: STM32F051
• Up to 48kHz PWM frequency
• Capacitor: 470uF/50V
• Voltage sensor: Yes
• Voltage: 2-6S Lipo
• Current flow: 60A / Burst: 80A
• BlHeli32 telemetry: Yes
• BEC: No
• Up to Dshot1200, Proshot, Oneshot, Multishot
• Target: iFlight-BL32-4IN1
• Weight:14.4g
• Drill holes: 30.5x30.5mm / 3mm diameter
• Size: 43x39mm

Content

• SucceX-D F7 V2.1 TwinG Flight Controller
• SucceX 60A 4in1