GEPRC CL20 FPV Frame 2 inch

GEPRC CL20 FPV Frame 2 inch

Product description

GEPRC CL20 FPV Frame 2 Inch

The GEPRC team has developed a new 2 inch frame: GEP-CL20. 2 inch frame can be slid back and forth in tight space, it can be adapted to O3 VTX and can also capture shocking effects in tight space. The resigned camera gimbal can easily eliminate the high frequency vibration and jello problems. GoPro 8/9/10/11, Insta360 Go2 and DJI Action2 cameras supported.

The distance of flight control mounting holes is 25.5mm*25.5mm, which is compatible with the various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm. The 9mm*9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight safer.

Specification

• Model: GEP-CL20
• Wheelbase: 100mm
• Main plate: 2.5mm
• Lower plate: 1.5mm
• Camera gimbal plate: 2.0mm
• Camera gimbal triangular plate: 1.5mm
• Motor plate gasket: 2.0mm
• FC mounting holes: 25.5mm x 25.5mm
• VTX mounting holes: 20mm x 20mm /25.5mm x 25.5mm
• Motor mounting holes: 9mm x9mm
• FPV camera distance: 20mm
• Suitable propeller size: 2 inch propeller
• Weight: 53.4g
• Flight controller: GEP-F4-35A AIO (mounting holes: 25.5mm×25.5mm)
• Motor: 1303.5 (Mounting holes: 9mm×9mm)
• ESC: 35A
• Propeller: 2 inch
• Recommended battery: 4S 660mAh

Feature

1. Combining aesthetics and technology for compact design

2. Designed to mount a shock absorbing gimbal under the independent FPV camera to reduce jello from FPV goggles image.

3. 2-inch pusher design, small size and lightweight, more suitable for complex and tight environments.

4. SPEEDX2 1303.5 5500KV motor with Emax four-blade propeller make the flight cozy.

5. Design the outer EVA damping ring to effectively reduce the impact force.

Contents

Plate:

• 1 x Main plate: 2.5mm
• 1 x Lower plate: 1.5mm
• 1 x Camera gimbal plate: 2.0mm
• 1 x Camera gimbal triangle plate: 1.5mm
• 1 x Motor plate gasket: 2.0mm

Screw package:

• 4 x M2*1.9-OD4.9 self-locking nut-brass color M2
• 1 x 7075 aluminum column M2*3.5*28
• 1 x 7075 aluminum column M2*3.5*25
• 1 x One-sided aluminum column with bare edge M2*3.5*28
• 1 x Single sided aluminum column with bare edge M2*3.5*25
• 2 x round head screw with base M2*8
• 18 x Round head screw M2*8
• 4 x round head screw M2*5
• 6 x round head screw M2*4 X6
• 10 x round head screw M2*12
• 4 x M2*16 round head screw
• 4 x round head screw M1.6*8
• 18 x round head screw M2*7
• 10 x Self-clinching nut M2
• 10 x nylon nut M2
• 4 x Nylon column M2*5mm
• 4 x Camera gimbal shock absorbing rubber ring
• 5 x Camera gimbal vibration absorbing rubber ring
• 4 x BEC silicone gasket

3D printed parts:

• 1 x VTX antenna mount (big hole)
• 1 x VTX antenna mount (small hole)
• 1 x receiver mount
• 1 x receiver mount
• 1 x TBS antenna mount
• 1 x camera mount (1 hole)
• 1 x camera mount (2 holes)

Injection molded parts:

• 4 x propeller guards

Other accessories:

• 1 x Naked GoPro 8 base
• 1 x 4S Naked GoPro power cable (with balanced connector head)
• 2 x Battery anti-slip pad
• 2 x Cushion pad
• 4 x EVA damping ring
• 2 x Receiver antenna tubes 100mm
• 2 x battery tie M15*150
• 1 x L-shaped screwdriver 1.5MM
• 2 x 3M double sided tape
• 1 x keychain