FlightOne Millivolt OSD Flight Controller

FlightOne Millivolt OSD Flight Controller

Product description

FlightOne Millivolt OSD Flight Controller

The FlightOne Millivolt OSD micro flight controller is the most advanced, performance driven, flight controller ever designed. The MillivoltOSD uses a powerful F405 MPU, with the High Speed Invensense 20602 gyro, allows you to take full advantage of FlightOne's efficient code to run at 32KHz for the best performance possible.

performance
The MillivoltOSD presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in FlightOne. Our filters along with the integrated FlightOne Gummies, allow you to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should be amazing for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise level and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt and Revolt OSD) and gives you the fastest response time possible.

software
Our flight controller comes pre-loaded with FlightOne One. The configurator and latest stable build can be downloaded from https://flightone.com/download. No drivers simply plug in the Millivolt OSD and it automatically connects to the Configurator
This is truly amazing software, which flies so well you can completely eliminate the prop wash. Setup is a breeze as well, just a couple of wizards and you want to get right up into the air.

Setup Simplicity
Setting up the Millivolt OSD is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest you can to the rest, you can put the revolt upside down and backwards just solder to the closest motor pad and the flightOne wizards wants to handle the rest. The Millivolt OSD so features DFU (sometimes DFU mode is required to get the latest bootloader and use software that we do not write) free updating and a self-healing and updating bootloader, just in case something does go wrong.

features

• weight: 3.3 grams
• Integrated Vibration Dampening FlightOne Gummies
• Inverter for Taranis and Futaba radios
• 3.3v or 5.0v for Spektrum, Taranis, etc
• LED Driver for WS2812b programmable LED
• High speed 32kHz gyro, lowest noise level and highest sensitivity gyro ever used
• Through hole solder pads - forms to I-Beam when soldered for extra strength
• FrSky Taranis, Spectrum, Futaba, JR, IBus, Sbus and other radio support
• Integrated buzzer driver
• Voltage and current ADC pins, for full voltage and current monitoring
• Full telemetry output support
• ESC flashing and configuration built into configurator
• Most active software development
• 3.3v and 5v voltage outputs
• 2 serial uarts
• Bluetooth expandable
• F4 processor
• 16mb of flash memory
• GPS expandable
• Pins into The Flight One Spark Micro 4in1 ESC
• Dimensions: 25mm x 25mm
• Mounting holes: 20mm squared to center of holes
• The FlightOne Guarantee
• In addition to all the other amazing things the Millivolt OSD presents, Millivolters get access to FlightOne's ticketed tech support which will include step-by-step help with installation, and anything else that may arise with your Millivolt OSD. We have the best support system and community in the industry.

design
A powerful flight controller design in a tiny package.
UART ports, that comes with the revolt. The Millivolt. The bonus is a light-weight tiny controller for small micro builds. The Millivolt even uses the same soft-mounting technology that comes with the Revolt in addition to the same powerful, strategically placed, electronic components.

Technology
A fast and efficient 32bit MCU with high clock speeds for top performance.
At the core of the FlightOne Millivolt, the F405 MCU stands out. The F405 MCU supports operating frequency up to 168MHz for fast performance with high-speed embedded flash memory up to 1 Mbyte and SRAM up to 192 Kbytes. The F405 MCU has been given the Millivolt the same performance the Revolt has, using the same wonderful FlightOne One firmware.

A super responsive gyro with the lowest noise floor allows for better data.
The Invensense ICM-20602 high performance, 6 axis MEMS gyro is a force to be reckoned with! The Millivolt is the second flight controller to use this fantastic device, the Revolt being the first. Both the gyroscope and the accelerometer have 3 axes each. The gyro itself has the highest sensitivity and lowest noise level of any gyro used in our application. This gyro lets us take the full advantage of speed by boosting our PIDc refresh rates up to 32KHz.