DJI Wookong Autopilot Multi-Rotor

DJI Wookong Autopilot Multi-Rotor

Product description

The flight controller WooKong-M is a global control system for multi-rotors, including platforms for the commercial and industrial use. Unlike other flight controllers who WooKong-M is compatible with ESCs, which are often used in remote-controlled helicopters. They can therefore be installed without costly rewiring. The Heli Mode provides for aerial professionals who are currently working with the Ace One, a seamless transition. The WooKong-M is made of high-quality, precisely calibrated components and equipped with integrated temperature compensation mechanisms in all gyros and sensors. It has a flight control algorithm which takes high regard in the world of unmanned aircraft.

• Modern stabilization controller for multi-rotor platforms (S900 / S1000 +)
• Supports nine different multi-rotor configurations and includes customizable engine settings
• Accurate GPS data for stabilizing the position and height
• Intelligent switching between multiple operating modes
• Intelligent Flight Control (IOC) and POI mode (target)
• Supporting general, PPM and S-Bus receivers
• Support the ground station for iPad
• Advanced reliability features, including automatic return to the starting point
• Single engine failure protection
• Two step undervoltage protection and automatic return to the starting point
• Integrated motor start / stop mode
• Compatible with DJI Video Link, iOSD, ground station, Zenmuse-Gimbal and future products
• New Assistant Software for Smartphones

basic performance

• Multi Rotor Types: Quad Rotor: +4, x4; Hexrotor +6, x6, Y6, Y Rev6; Octorotor +8, x8, V8
• Supported ESC output: 400 Hz refresh rate
• Recommended Transmitter: PCM or 2.4GHz with minimum 7 channels and is available on all channels failsafe function
• Recommended battery: 2S ~ 6S LiPo
• Power consumption: Max. 5 W (0.9 A at 5 V, 0.7 A at 5.8 V, 0.5 A at 7.4 V, 0.4 A at 8V)
• Operating temperature: -5 ° C to + 60 ° C (holding the IMU warm if you want to use them at low temperatures below -5 ° C.)
• System Requirements for Software Assistant: Windows XP SP3 / Windows 7 / Windows 8

flight performance

• Hovering Accuracy: Vertical: ± 0.5m, Horizontal: ± 2 m
• Suitable wind conditions: <8 m / s (28,8 km / h)
• . Max yaw angular velocity: 150 ° / s
• Max. Angle of inclination: 35 °
• Climb / descent: ± 6 m / s

hardware

• Weight: Total weight: <= 118 g (total)
• Flight Controller: 51.2 mm x 38.0 mm x 15.3 mm
• IMU: 41.4 mm x 31.1 mm x 27.8 mm
• GPS and compass: 50 mm (diameter) x 9 mm
• LED display with 25 mm x 25 mm x 7 mm
• PMU: 39.5 mm x 27.5 x 9.7mm
• Integrated Functions: Autopilot with three operating modes, Advanced reliability, support of 2-axis gimbal, undervoltage protection, approaching the starting position and autoland, support of D-Bus receiver, Intelligent Flight Control (IOC)