Diatone FPV Taycan C3.1 6S Racing Drone PNP

Diatone FPV Taycan C3.1 6S Racing Drone PNP

Product description

Diatone FPV Taycan C3.1 6S Racing Drone PNP

Taycan MXC3.1 Frame

• Wheelbase: 157.5 mm
• Prop size: Recommend 3 inch
• FC mount: support 20 × 20 mm (M2）/25.5 × 25.5 mm/（M2）/30.5 × 30.5 mm (M3）)
• Motor mount: 16 mm (M3)
• Camera distance: 19 mm
• Thickness of top plate: 2 mm
• Bottom plate thickness: 2.5 mm
• Arm plate thickness: 2.5 mm
• Aluminum alloy: 7075
• Carbon fiber: T300 3K
• Weight: 158g

MAMBA AIO F411 35A Flight Control AIO ESC (20MM)

• MCU: 100 MHz STM32F411CEU6
• GYRO: MPU6000
• Barometer: No
• OSD: Yes
• Blackbox: No
• Uarts: 2 Set
• ESC Soft: Dshot300/600
• Power Led: Yes
• LED Controller: BF LED
• F.Port: No
• RSSI: Yes
• Buzz: Yes
• Input: 3 ~ 6S Lipo (12.6 ~ 25.2 V)
• BEC: 3.3V 0.5A & 5V 2A & 9V 2A
• Size: 42 × 33 × 6 mm
• Mouth hole: 20×20,M2

• ESC:
• Con. Current: 35A×4
• Burst current: 40A (10S)
• Target: BLHeli_S CH40
• SOFT: Dshot300/600

MAMBA TOKA 2203.5 2650 KV motor

• Slots / Poles: 12N14P
• Stator diameter: 22mm
• Stator height: 3.5mm
• Rated voltage: 4 ~ 6S (16.8 V ~ 25.2 V)
• Peak current: 15.59A
• ldle current: 10 V / 0.3 ~ 1.0 A.
• Maximum power: 380.8W.
• Internal resistance: 232mΩ.
• Overall dimension: 28.9 × 29.4 mm
• Propeller mounting shaft diameter: 5 mm
• Installation hole position: 16 × 16 mm ， M3
• Bearing: 9*4*4

MAMBA TINY 400MW VTX

• Working voltage: 4.5-5.5V
• Working current: 380mA (5V/400mW)
• Working temperature: 80 ℃
• Video input impedance: 75
• Size: 12.2 × 17 × 4.5mm
• Antenna connector: IPEX
• Video format: NTSC / PAL Protocol: IRC
• Output power: 25mw/100mw/200mw/400mw/

MAMBA ULTRA RHCP Antenna

• Frequency range (MHz): 5500-6000
• Polarization: RHCP
• Gain (dBi): 2,5
• VSWR (5800MHZ): ≤1.5

RUNCAM PHOENIX 2 1000TVL FPV Camera

• Image sensor: 1/2 "CMOS sensor
• Horizontal resolution: 1000TVL
• Lens: 2.1 mm (M12) FOV155 ° (4: 3)
• Power: DC 5-36V
• Current: 200 mA at 5 V, 85 mA at 12 V
• Net weight: 9g
• Dimensions: 19 mm * 19 mm * 20 mm

Contents

• 1x Diatone Taycan C3.1 6S FPV Drone
• 1x Buzzer
• 2x battery belt
• 1x M2 screw accessory kit
• 1x M3 screw accessory kit
• 1x 20mm PC spacer