BetaFPV TWIG XL FPV Toothpick Quad PNP

BetaFPV TWIG XL FPV Toothpick Quad PNP

Product description

The TWIG XL FPV Toothpick Quad is the first joint quad with Racer X FPV.

This TWIG XL frame is definitely the most popular frame right now. The performance and power to weight ratio of this frame design is out of this world! With Caddx Ratel camera, 1404 3800KV brushless motors and 3/3.5 inch propellers, it supports 450mAh 4S battery and gives you super efficient flying experience.

Specification

• Weight: 105g (without battery)
• Motors: 1404 3800KV Brushless Motors
• Frame: TWIG XL Frame
• Receiver Option: PNP
• Recommended battery: 450mAh 4S battery (NOT included)
• Flying time: 3:00-5:00minutes

The TWIG XL frame is made of 3mm thick high quality T700 carbon, cut along the fabric and beveled to .7mm on both sides on the inside and outside edges. All frames are approximately 140mm from motor post to motor post and swing up to 3" or 3.5" props. The frames accommodate a 4 hole motor mount for 9x9 or 12x12 motors.

Gemfan 3520 3-blade props and HQ 3520 3-blade props are available for installation in the TWIG XL FPV Toothpick quad. The 3 blade design with 3.5 inch propeller diameter can provide your quadcopter with strong power from the ground.

If you want smooth freestyle flying with the TWIG XL drone, we recommend the Gemfan 3520 3-blade propellers.

If you want powerful racing flying with the TWIG XL drone, we recommend the HQ 3520 3-blade propellers.

The X-Knight Canopy , which comes with the TWIG XL, is suitable for all mini cameras with 19*19mm or 20*20mm mounting hole, such as Caddx Vista or DJI FPV Unit camera, Caddx Turtle V2, RunCam Racer 3.

This canopy allows a camera tilt angle of 10-50 degrees.

Contents

1 * TWIG XL 3'' FPV Quad
1 * Gemfan 3520 3-blade props (4 pieces)
1 * HQ 3520 3-blade props (4 pieces)
1 * Set of M2*7 screws for propeller
*Battery is NOT included.