BetaFPV Pavo25 Whoop Racing FPV Quadcopter Analog VTX PNP

BetaFPV Pavo25 Whoop Racing FPV Quadcopter Analog VTX PNP

Product description

BetaFPV Pavo25 Whoop Racing FPV Quadcopter Analog VTX PNP

The Pavo25 Whoop Quadcopter is a 2.5-inch FPV pusher drone designed by BETAFPV. The new frame design optimizes its structure to reduce complex components and requires only 6 screws to assemble the whoop channel and drone. Made of high quality PA12 material, it has a sturdy injection molded frame for durable use. Moreover, it supports many FPV cameras available in the market for FPV recording. Besides, it is equipped with Caddx Baby Ratel2+A03 400mW 5.8G for VTX analog version.

Features

• Only 6 screws to assemble the whoop channel and the drone. Pavo25 Whoop Quadcopter has a reasonable design of structure assembly, which is optimized to reduce complex components.
• Equipped with a CNC vista adapter. It cools the Caddx Vista HD Digital VTX with a good cooling by increasing the heat dissipation, allowing a flight in a safe VTX RF performance, which is especially important for long-distance flight.
• The Pavo25 Whoop Quadcopter features an innovative pusher frame with a channel design that creates more lift for the entire quadcopter, improving its ability to endure and propel.
• Made of high quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, Pavo25 Whoop Quadcopter ensures a more stable flight and optimizes the vibration damping structure for the camera mount.
• User-friendly design. The USB port on the top of the frame makes it convenient to configure the quadcopter. Pavo25 Whoop Quadcopter has a rear LED with colorful lights, giving a cool and visual performance in the dark.
• Balanced layout for the whole quadcopter. If you carry an action camera like SMO 4K or DJI Action 2, you can move the battery position and add the second battery strap to keep the center of gravity and prevent it from tipping to one side.
• The Analog VTX version comes with a Caddx Baby Ratel2 camera with a 1/18" inch Starlight HDR sensor with 1200TVL resolution and an A03 400mW VTX, an open-source video transmitter with PIT/RCE/100mW/400mW adjustable output power.

Technical Data

• Weight: 140g (analog) without battery and action camera
• Wheelbase: 108mm
• Frame: Pavo25 frame kit
• Motor: 1404 4500KV brushless motor
• Battery connector: XT30
• Propeller: Gemfan D63-3B (Grey)
• Flight controller: F405 AIO 20A toothpick V4 BMI270
• VTX: Caddx Baby Ratel2+A03 400mW 5.8G (Analog)
• Adjustable camera angle: 0°-50°.
• Receiver version: PNP
• Recommended battery: 4S 750mAh/4S 850mAh (not included)
• Flight time (reference only): 8.5 min (analog)

Camera & VTX System

The Pavo25 Whoop Quadcopter Analog VTX version comes with a Caddx Baby Ratel2 camera that has a 1/18" inch Starlight HDR sensor with 1200TVL resolution, and an A03 400mW OpenVTx video transmitter that supports SmartAudio&Tramp protocol with PIT/RCE/100/400mW adjustable output power. Therefore, pilots can adjust the output power and frequency.

Pavo25 Frame Kit

Pavo25 frame is made of high quality PA12 material with strong and durable injection molding, which ensures more stable flight and no fear of damage. The whole frame with pusher and channel design can generate more lift for the whole quadcopter, which improves the ability of endurance and propulsion. Besides, the vibration damping structure is optimized for the camera mount to carry an action camera easily.

FC & ESC

Pavo25 whoop quadcopter is equipped with Toothpick F405 AIO 20A FC V4 BMI270, it extremely reduces the weight while improving the ability of ESC to continuous current 20A and brings pilots more power.

Motor & Propeller

The Gemfan D63 3-Blades Props is designed to be installed inverted, allowing pilots to fly smoothly! It is more durable and powerful, providing pilots with a highly efficient flying experience. Equipped with 1404 4500KV brushless motor, it brings more powerful performance and less noise.

Contents

• 1 x Pavo25 Whoop Quadcopter (Analog VTX)
• 4 x Gemfan D63 (2CW+2CCW) 3-blade propellers
• 1 x Spare battery strap 180mm
• 2 x spare EVA foam strap (black)
• 2 x spare EVA foam tape (red)
• 4 x 3M double-sided adhesive tapes
• 1 x SMO4K Camera Mount
• 1 x SMO4K power cable
• 1 x M5*18 screws
• 1 x M5 anti-slip nut
• 10 x M2*7 screws