BetaFPV 85X Whoop 4S 4K Quadcopter HD DVR DSMX
BetaFPV 85X Whoop 4S 4K Quadcopter HD DVR DSMX
Beyond a 4K whoop, the future has just arrived!
What's the perfect size for many tight places the DJI drone can't reach? Are you curious if the 4K BetaFpv 85mm Whoop can get you there or do you want to discover a whole new and different world?
NOW
! Let your creativity run free and fly with us!
Weight only max. 95 g, but high performance for Ultra HD videos. Experience FPV racing in HD quality simultaneously with the top-tariser 4K 1200TVL dual-lens camera with filter. Discover a different world with 4K whoop!
The Beta85X 4K 4S Whoop - is undoubtedly the smallest 4S 4K drone currently available.
Since YKS has shared its 4K film with stunning videography, people are fascinated by 4K whoop. So here we are. A real 4S 4K Beta85X Whoop !!! By upgrading the F4 V2 FC with BLHeli_32 16A ESC using N-Channel MosFETs, the structure and performance becomes more stable and 4S performance is definitely supported. Equipped with the Tarsier 4K-FPV camera, a great choice for cruising, so you can get the right cine feeling from your Beta85X 4K.
The F4 V2 FC board has an additional 4 pluggable connectors for ESC, VTX, RX and LED boards, which allows for convenient installation and reduces the need for staggered PIN mounting. High-performance FC boards with STM32F405 processor and optimized Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are achievable. Use of single N-channel MosFETs on the ESC board with lower internal resistance. These are two MosFETs on the original BLHeli_32 ESC board. Soldered with 25V / 220uf electrolytic capacitor to protect the ESC board to reduce the error rate caused by the momentary high voltage. The BetaFpv 85X Cine Whoop 4K is supplied with the Caddx Tarsier 4K camera with ND8 filter, the APP supports switchable resolution setting of 4K, 2.7k, 1440P, 1080P. Improved 1105 motor from 6000KV to 5000KV, with a light weight but guaranteed extreme power and speed. The motor is supplied with cable connectors and the robust and light frame is adapted to the Beta85X. To increase stability, we add special additional carbon fibre stiffening struts. No soldering or tinkering is necessary on the Cin Whoop 85X HD 4K. 450mAh 4S high capacity battery is recommended as standard. The pilot can also use his own batteries with battery holder. Optional and affordable. 3 versions are available for brushless 85mm hoop drones - Beta85X FPV, Beta85X HD and Beta85X 4K.
Technical data
FC
ESC
FPV Camera
What has BetaFpv done to support 4K? Here are all changes in contrast to the previous models.
This Beta85X has been heavily upgraded in parts such as FC, ESC, engine to support 4S voltage at constant power and take you into a glorious FPV world.
F4 FC & BLHeli_32 ESC
Supports 4S Power. Built for ESCs using a 32-bit MCU. With increasing computing power, faster input signals with lower latency and higher update rate are possible with BLHeli_32, such as Dshot1200!
When using individual N-channel MOSFETs on the ESC board, the internal resistance is lower. These are two MosFETs on the original BLHeli_32 ESC board. Current sensor is included. ESC is mounted with screws on the frame and connected with FC boards via cables.
1105 5000KV Motor
Reduction of KV to 5000KV for the new Beta85X 4S, which can support 4S performance that does not lead to overheating or burns Engine cables have been changed from 30AWG to 28AWG.
Frame
stiffener brace The carbon fibre stiffener brace has reinforced the Beta85X frame to prevent instability caused by excessive power when flying the Beta85x.
CADDX TARE 4K CAMERA
The TARE camera is the first DVR board that supports 4K @ 30fps.
There are 2 buttons on the DVR board. One is for WLAN and recording. The other one is for power and recording mode.
For more information about the CADDX Tare Camera please download the Tare Manual here.
There is also a CADDX Tarsier APP available in the Apple Store (for IOS phones) or in the Google Store (for Android phones). With the APP you can change the settings like metering, white balance, exposure compensation, IOS limit, sharpness, contrast and saturation.
ND8 Fliter to obtain a better film material and to eliminate the jello effect. ND Filter-Light does not reduce color cast.
PROPS OUT
The Beta85X drone is supplied with propellers as standard.
Betaflight's default setting is props out to reduce the amount of cotter immersion in even the hardest turns.
Content
No batteries are included in all versions. The 450mAh 4S battery is highly recommended.
| Order number | BET-00313564-2-DSMX |
|---|---|
| EAN | 0724779301822 |
| Manufacturer | BetaFPV |
| Produktsicherheit | Hersteller: BETAFPV Technology Co., Ltd. Room 2007, Block 2, Building 11, Cloud Park, Bantian Street, Longgang District, Shenzhen 518129, P.R. China E-Mail: support@betafpv.com Verantwortliche Person: meilon GmbH Konrad Zuse Ring 31 53424 Remagen Deutschland E-Mail: support@meilon.de Tel.: +49 (0)2642 / 40 52 88 0 |
