APD X Class TBS APD PDB500 12S 52V 500A PDB

APD X Class TBS APD PDB500 12S 52V 500A PDB

Product description

APD X Class TBS APD PDB500 12S 52V 500A PDB

Signal and telemetry lines are arranged between the negative layers (GND) to shield them from switching noise at high power levels. Negative (GND) layers on top to shield the flight controller from switching noise.

It also has double-sided main input power pads that can be soldered or screwed to. It allows the flight controller to be mounted with a standard hole spacing of 30.5 mm x 30.5 mm. The soldering tabs protrude from the PCB to provide thermal relief and facilitate soldering.

Manufactured using high performance ISOLA 185HR dielectric glass fiber to allow continuous high temperature scenarios.

Be assured that your soldering tags will not fail even at 500A loads!

Technical data

• 4S-12S Input
• 8 layers of 4oz copper to each ESC
• 12V @ 3A switching regulator
• 5V @ 3A switching regulator
• Overcurrent and short circuit protection for 5V and 12V regulators
• Has two main inputs, modular battery
• Thermal relief on all soldering tags to facilitate soldering
• 2.5 mm thickness for strength and reliability
• 58mm x 58mm size
• PCB designed for 180°C continuous operation
• Dielectric glass fibre ISOLA 185HR for maximum thermal performance
• Designed and manufactured in Australia